Bematech MP-4000 TH Programmer's Manual Manual do Utilizador Página 33
- Página / 84
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
MP-4000 TH POS Printer Rev.1.4 Programmer’s Manual
22-aug-2007
Firmware Release: 1.5
33
ESC SO
[Function] Set on-line expanded mode
[Format] ASCII ESC SO
Hexadecimal 1B 0E
Decimal 27 14
[Description] If this command is received in the beginning of the line, expanded is
valid for all line. If already exist some characters in the line, next
characters in this line (if any) will be in expanded mode. Next lines will
be in normal mode.
ESC V
[Function] Set on-line double height mode
[Format] ASCII ESC V
Hexadecimal 1B 56
Decimal 27 86
[Description] If this command is received in the beginning of the line, double height
is valid for all line. If already exist some characters in the line, next
characters in this line (if any) will be in double height mode. Next lines
will be in normal mode.
ESC W n
[Function] Enable / Disable expanded mode
[Format] ASCII ESC W n
Hexadecimal 1B 57n
Decimal 27 87 n
[Description] Set expanded mode (double width).
9 When n is 1 (01h or 31h), the expanded mode is enabled.
9 When n is 0 (00h or 30h), the expanded mode is disabled.
[Notes] This command can be sent at any time, even in the middle of the line.
- Introduction 5
- Developers advice 5
- 1 Commands 6
- 2 Using the command summary 7
- 2.2 ESC/POS Command Table 11
- 3. ESC/Bema Commands 14
- GS F9h 1Fh 31h 15
- ESC b n 15
- ESC v n 15
- ESC y n 16
- GS F9h - n 18
- GS F9h ! n 18
- GS F9h ‘ n 20
- GS F9h “ 0 20
- 3.2 Vertical positioning 22
- 3.3 Horizontal positioning 25
- ESC a n 26
- 3.4 Character Types 27
- ESC ! n 30
- ESC } n 30
- 3.6 Bit images and graphics 35
- ESC $ n1 n2 36
- ESC * ! n1 n2 b1...bn 36
- ESC K n1 n2 b1...bn 37
- FS p n m 37
- 3.7 Communication 42
- 1) Printer Status 43
- 2) Off-line Status 43
- 3) Error Status 43
- 3.8 Data Control 46
- 3.9 Barcodes 47
- 4. ESC/POS Commands 57
- ESC = n 58
- ESC c 3 n 59
- ESC c 4 n 59
- Connector pin 60
- GS V m (n) 62
- ESC ( A pL pH fn n c t1 t2 62
- 4.2 Vertical positioning 63
- ESC d n 65
- ESC SP n 66
- Justification 67
- 0, 48 Left justification 67
- 1, 49 Centering 67
- 2, 50 Right justification 67
- 4.4 Character types 68
- DLE EOT n 70
- DLE ENQ n 71
- 4.6. Data Control 76
- 4.7. Barcodes 76
- 4.8. Bit images and graphics 76
- Appendix I – Tables 77
- Code Page 437 78
- Code Page 850 79
- Code Page 858 80
- Code Page 860 81
- Code Page 866 82
Manuais e produtos relacionados com Impressoras Bematech MP-4000 TH Programmer's Manual
(48 páginas)
Impressoras Bematech MP-2100 TH Manual do Utilizador
(36 páginas)
(36 páginas)
Impressoras Bematech KF-6580 Manual do Utilizador
(24 páginas)
(24 páginas)
Impressoras Bematech KC-1800 Manual do Utilizador
(24 páginas)
(24 páginas)
Impressoras Bematech KB-1800 Manual do Utilizador
(24 páginas)
(24 páginas)
Impressoras Bematech MP-20 FI II Manual do Utilizador
(132 páginas)
(132 páginas)
Da-Lite Tensioned Cosmopolitan Electrol manuels
Manuels d'utilisation et guides de l'utilisateur pour Écrans de projection Da-Lite Tensioned Cosmopolitan Electrol.
Nous fournissons des manuels en pdf 1 Da-Lite Tensioned Cosmopolitan Electrol à télécharger gratuitement par type de document : Manuel
Comentários a estes Manuais